BUNNING LoPro 670, Руководство пользователя

Страница: 17 / 60

LOPRO 670 & 780 MANURE SPREADER – INSTRUCTION & SPARES MANUAL
Page
15
5.
Grease brake pivot bushings (Tandem Suspension machines).
6.
Grease parking brake leaver joint.
7.
Check and adjust the apron chain tension.
ANNUALLY
1. Change oil to all gearboxes.
2. Check the condition of the frame sealing flaps. Replace if not sealing the sides or bottom.
a. Front.
b. Rear Slurry Door Auger Deck.
3. Check brake setting.
Brakes can be checked by depressing the brake petal with the engine running and the tractor in gear; release
clutch to determine brake adjustment.
4. Check condition of rotor blades and paddles. Repair when there are loose bolts, cracked welds, chipped, bent
or broken blades or paddles. Replace when any components are worn within 1 inch of flighting.
5. Clean machine.
6. Check general hardware/bolt tightness. Retighten if necessary.
It is recommended to apply waste oil to the floor chains periodically when spreading dry material and particularly at
the end of the spreading season. This assists in the smooth running of the machine and prolongs the working life of
the components.
7. Check bearings in gearboxes.
2.3 Amount of oil required to fill gearbox
Please use EP90 gear oil
RT800/60/32 2.77 gallons
SRT 12 3.6 gallons
SRT 18 3.55 gallons
Horizontal beater gearbOx 4.3 gallons