BUNNING LoPro 670, Руководство пользователя

Страница: 11 / 60

LOPRO 670 & 780 MANURE SPREADER – INSTRUCTION & SPARES MANUAL
Page
9
1. OPERATING INSTRUCTIONS
The intended purpose of the vehicle is to tow and spread manure and other materials.
1.1 Hitching to tractor .
Attach spreader to pick‐up hook or static hitch stub. Do not attach to swinging drawbar or pick‐up hook
in extended position.
Remove screwjack from drawbar (if fitted) and locate in transport position provided at the front of
spreader.
Turn off the tractor and remove key before fitting PTO.
Slide the tractor end of the PTO shaft out and fit to the tractor PTO. Lay the two halves of the PTO shaft
alongside one another and mark the required lengths, allowing for turning. Maximum pull out of 12 inches
of the 2 shafts. Cut to size and clean burrs at each end of shaft
KEEP SHAFT SLIDING SURFACES GREASED.
Attach chains fitted to PTO guard (to prevent rotation of guard) to suitable point on the tractor and hole
provided on metal cover over PTO shaft on spreader. Ensure that the spring loaded pins in splined yokes
are fully locked in position. Always disengage the PTO when turning sharply to avoid damage to shafts
universal joints. Where a wide angle PTO is fitted attach this end to the tractor. Please refer to the DVD
for more information.