manualshive.com logo in svg

Bunn My Cafe AP, Техническое учебное пособие

Поделиться
Скачать
Bunn My Cafe AP Скачать руководство пользователя страница 23

Unit Objectives

U

nit

 5  t

roubleshooting

Given a realistic scenario depicting one of several possible machine malfunctions, the learner will be able to 

effectively troubleshoot, diagnose and repair the malfunction before returning the machine to normal opera-

tion.

 

 

Given a machine displaying an error or warning message, all the necessary tools and safety equip 

 

ment, the learner will be able to access the software and use “Service Tools” menu as a tool to assist  

 

in the diagnosing process.

 

 

The learner will be able to access the programming menu.

 

 

The learner will be able to navigate to the Service Tools menu.

 

 

The learner will be able use the Service Tools menu to test inputs or outputs.

 

 

The learner will be able use the Test Switches menu for testing.

 

Given a list of error and warning messages, the learner will be able to explain the error and warning  

 messages.

 

Given a realistic scenario requiring diagnosis and the leaner to remove the assemblies, the learner  

 

will be able to remove the assembly without error. 

 

 

The learner will be able to remove and re-install the hot water tank.

 

 

The learner will be able to remove and re-install the ejector assembly.

 

 

The learner will be able to perform the index motor alignment procedure

 

Содержание My Cafe AP



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды