Bunn LCR-2 Скачать руководство пользователя

Страница: 10 / 36

OPERATING CONTROLS AND INTERFACE

1a. Dispense Handles: Pull and Hold to dispense product.

1b. Dispense Switches: Push and Release to dispense product for Portion Control Models.

2. Stop Switch: Momentary switch stops all dispense functions.

3a. Hot Water Switch: Push and Hold switch to dispense hot water from the center dispense tip.

3b. Push and Release switch for Portion Control Models.

4. Alternate Portion Control Switch: Momentarily pushed to select the Alternate Portion Control Volume #2.

5. Function Selector Switch: Allows the user to set the dispenser into different dispensing modes.

a. Rinse: Dispenses hot water only- Flushes the mix chamber and dispense tip.

b. Prime: Dispenses concentrates only – Primes the concentrate pump.

c. Normal: Normal dispense mode - Dispenses mixed product (concentrate and water).

6. Mode Selector Switch: Allows the user to set the dispenser into different operating modes.

a. Run: Normal operating position.

b. Off: Turns off all functions including tank heater and chiller.

WARNING - The OFF Mode does not remove AC power from the dispenser. Disconnect power source before

servicing the dispenser

c. Night: Anti-pilfering mode that disables dispensing, but keeps the tank heater and chiller (if applicable)

operational.

7. Door Interlock Switch: Unit will not dispense product if the door is open.

8. Power LED: Red - illuminates when AC power is applied to dispenser.

9. Ready LED: Green - illuminates when the water is at the preset ready temperature.

10. Portion LED: Yellow - illuminates when the portion dispense option has been selected, (5 second delay).

11. Rinse LED: Yellow - illuminates when the optional preset rinse alarm time has elapsed.

12. Left Refill LED: Yellow - illuminates when the Left Concentrate BIB needs replaced.

13. Right Refill LED: Yellow - illuminates when the Right Concentrate BIB needs replaced.

14. Programming Keypad: Used in conjunction with the LCD display to program and calibrate the dispenser to

customer specific requirements. (Located behind the splash guard panel)

15. LCD Display: Displays programming menus and fault messages. (Located behind the splash guard panel)

36026 120105

BUNN ICED COFFEE

AMBIENT UNIT

5 6

Содержание LCR-2





































Результаты поиска

Содержание LCR-2

Отзывы:

Похожие инструкции для LCR-2

Бренды по названию

Популярные бренды

Bunn LCR-2, Инструкция по установке и эксплуатации

Результаты поиска

Содержание LCR-2

Отзывы:

Похожие инструкции для LCR-2

Бренды по названию

Популярные бренды