Page 14
PROGRAMMING (cont.)
34. When finished, press the other batch size and repeat step # 33.
35. When finished setting both batch sizes, press and release DONE.
36. The display should now read LAST ON:. Adjust the LAST ON TIME using (-) or (+). If PREINFUSION is
desired, set the LAST ON TIME to PreI.
37. When finished, press the other batch size and repeat step # 36.
38. When finished setting both batch sizes, press and release DONE.
39. The display will show the three times just entered. Press and release each batch size to display the settings
for that batch. If the 1
ST
ON TIME is set to OFF, the display will read PULSE BREW DISABLED. After a 5
second delay, the display will read 2 BATCHES DONE?
40. If both the pulse brew settings for both batch sizes are not correct, press and release NO to return to the 1
ST
ON TIME setup screen and repeat steps 24 through 39.
41. If both batch sizes are correct, press YES. The display should now read DRIP TIME.
Setting DRIP TIME:
42. The display should now read DRIP TIME, along with either the word OFF or a time showing. A batch light
will also be blinking.
43. Using (-) or (+), set the amount of time from when the brew spray ends to when the funnel is emptied of hot
liquid.
44. When finished, press the other batch size and repeat step #43.
45. When finished setting both batch sizes, press and release DONE. The display should read 2 BATCHES DONE?
46. Select YES. The screen should show the name of the recipe being programmed (modified) along with SETUP
COMPLETE.
This function allows the operator to assign a recipe to (or disable) each of
the 4 brew switches (A, B, C & D). Any saved recipes listed under "REVIEW
RECIPES" can be assigned to a brew switch. Only one recipe per brew switch
is allowed.
Procedure to select switch recipes
1. Press and hold the right hidden switch until the display reads BREW
LOCKOUT. Press and release the right hidden switch until the display
reads ASSIGN RECIPE? Press YES.
2. The display should now read SELECT RECIPE BREW SWITCH A, and
then "RECIPE NAME".
3. Using (-) and (+), scroll through the stored recipes in the brewer’s
memory until the desired recipe name is reached.
4. Select DONE to set that recipe.
Procedure to disable a Brew Switch:
1. Follow the same procedure as above. Choose DISABLED instead of
recipe name.
2. Select DONE to disable that brew switch.
ASSIGN RECIPE
NO YES
48497.2 111017
