4
ELECTRICAL REQUIREMENTS
This grinder has an attached cordset and requires:
2-wire, grounded service rated 120 volts ac, 9 amp, single phase, 60 Hz for 120 volt models,
2-wire, grounded service rated 230 volts ac, 4 amp, single phase, 50 Hz for 230 volt models,
2-wire, grounded service rated 100 volts ac, 9 amp, single phase, 50 Hz for 100 volt models.
NOTE: If the power cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
33736 072310
CE REQUIREMENTS
• This appliance must be installed in locations where it can be overseen by trained personnel.
• For proper operation, this appliance must be installed where the temperature is between 5°C to 35°C.
• Appliance shall not be tilted more than 10° for safe operation.
• An electrician must provide electrical service as specified in conformance with all local and national codes.
• This appliance must not be cleaned by water jet.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given instructions concerning use of
this appliance by a person responsible for its safety.
• Children should be supervised to ensure they do not play with the appliance.
• If the power cord is ever damaged, it must be replaced by the manufacturer or authorized service personnel with
a special cord available from the manufacturer or its authorized service personnel in order to avoid a hazard.
• Machine must not be immersed for cleaning.
