Page 29
DRIP TIME (now displayed on "non" funnel lock
units as well)
This function allows the setting or modification
of the funnel locks to stay engaged after the end of
a brew cycle. This ensures that the funnel cannot be
removed until after the liquid has emptied out of the
funnel.
Procedure to modify drip times:
Range:
OFF to 10 minutes for all three batch sizes.
NOTE:
If the brewer is already in the
DRIP TIMES
screen, it is not necessary to follow steps 1 through
9 in this section, but proceed directly to step 10.
1. Press and hold the upper right hidden switch until
the display reads
UNITS.
Release the switch. Press
and release switch until the display reads
REVIEW
RECIPES
.
2. Press
YES
to proceed. The display should now
read
NO-NAME LEFT,
along with
MODIFY, SHOW
and
NEXT.
3. Press and release
NEXT
to advance to the desired
coffee name to be modified.
4. Press and release
MODIFY.
The display should
read
BREW OZ.
5. Press and release
DONE
. The display should read
3 BATCHES DONE?
.
6. Press and release
YES
. The display should now
read
% BYPASS.
7. Press and release
DONE
. The display should read
3 BATCHES DONE?
.
8. Press and release
YES.
The display should now
read
SET PULSE BREW.
9. Press and release
NO.
The display should now read
DRIP TIME,
along with either the word
OFF
, or a
time will be showing. A batch light should also be
blinking.
10.
Using the
(-)
and
(+)
, set the amount of time from
when the brew solenoid shuts off to when drip-out
occurs for that batch size.
NOTE:
Set to
OFF
to prevent funnel locks from engag-
ing (to disable this function), for a particular batch
size. To set to
OFF,
press and release
(-)
until
OFF
is
displayed.
P2297
REVIEW RECIPES?
NO YES
3 BATCHES DONE?
NO YES
DRIP TIME X:XX
(-) DONE (+)
NO-NAME LEFT
MODIFYSHOWNEXT
EXIT TO
NEXT FUNCTION
SCREEN
ADVANCES TO ALL OTHER
COFFEE NAMES PROGRAMMED
IN THE BREWER'S MEMORY
WHEN THE LAST COFFEE NAME
IN THE BREWER'S MEMORY IS
DISPLAYED, PRESSING
NEXT
WILL EXIT AND THE DISPLAY
WILL THEN READ:
EXITS TO THE NEXT COFFEE NAME
IN THE BREWER'S MEMORY. IF NO
OTHER COFFEE NAMES ARE
ENTERED IN THE BREWER'S
MEMORY, THE DISPLAY WILL READ:
(COFFEE NAME)
MODIFYSHOWNEXT
(COFFEE NAME)
SETUP COMPLETE
THAT WAS THE
LAST RECIPE
PRESS
DONE
YES
DONE
YES
NO
NO
SCREEN DISPLAYED
BREW OZ: XX.XX
3 BATCHES DONE?
% BYPASS XX.X
3 BATCHES DONE?
SET PULSE BREW?
SET PREINFUSION?
11. When finished, press another batch size and repeat
step 10 until all three sizes are set.
12. When finished, press
DONE
. The display should
read
3 BATCHES DONE
?
13. If the three batch sizes are set correctly, press
YES
.
The screen should show the name of the coffee
flavor being programmed (modified) along with
SETUP COMPLETE
.
14. After a 5 second delay, the display will advance to
the next coffee name in the brewer's memory. If
no other coffee names are present, the display will
read
THAT WAS THE LAST RECIPE
, and return to
the
REVIEW RECIPES
screen.
P2297
PROGRAMMING THE BREWER (cont.)
29877-3 062005
