Page 12
PROGRAMMING THE BREWER (cont.)
RECIPE PROGRAMING METHODS
There are three methods of programming the
various brewing parameters of the DUAL SH DBC with
Smart Funnel Brewer.
METHOD 1:
Using a Smart Funnel and a G9-2T DBC or MHG
Grinder:
Certain coffee
NAMES
are stored in the G9-2T DBC
or MHG's memory. When a particular name of coffee
is ground into the Smart Funnel, that name and the
batch size selected are transferred from the grinder to
the programming
chip
located in the funnel's handle.
The funnel is then inserted into the brewer's left side
funnel rails. The sensor coil on the brewer reads the
information contained in the handle. This then allows
the operator to set the
BREW VOLUMES, BYPASS
PERCENTAGES, PULSE BREW TIMES, PREINFUSION
TIMES
and
DRIP-OUT TIMES
for that particular coffee
NAME
. Each coffee
NAME
can be set individually to
provide optimum brewing quality.
METHOD 2:
Using a RECIPE CARD to enter all of the brew set-
tings at one time:
If using a coffee name not in the grinder's memory,
the customer can obtain a
RECIPE CARD
from the
factory with all the information needed to set up that
particular coffee name. This includes the
COFFEE
NAME
,
BREW VOLUMES, BYPASS PERCENTAGES,
PULSE BREW TIMES, PREINFUSION TIMES,
and
DRIP-OUT TIMES.
METHOD 3:
Not using a Smart Funnel and/or a G9-2T DBC or
MHG Grinder:
This allows the operator to enter
ONE
set of brewing
parameters for each side, in the event a Smart Funnel
and/or a G9-2T DBC or MHG is not used with the Dual
SH Brewer. This is referred to as a
NO NAME
coffee
flavor. If the brewer does not read the information in
the funnel's handle, it automatically selects the
NO
NAME
brewing parameters set up prior to brewing.
This includes
BREW VOLUMES, BYPASS PERCENT-
AGES, PULSE BREW TIMES, PREINFUSION TIMES
and
DRIP-OUT TIMES
for the three batch sizes.
ARE YOU CREATING OR CHANGING A RECIPE FOR A
COFFEE NAME PREVIOUSLY USED IN THIS BREWER?
REFER TO NAME LIST
IN GRINDER MANUAL
CONTACT BUNN-O-MATIC
FOR ASSISTANCE
GO TO
REVIEW RECIPES
AND FOLLOW INSTRUCTIONS
TO VIEW A LIST OF EXISTING RECIPES,
GO TO
REVIEW RECIPES
AND FOLLOW THE INSTRUCTIONS
GO TO
SET NEW RECIPE
,
AND FOLLOW THE
INSTRUCTIONS
YOU WILL ENTER
THE NO NAME LEFT
AND NO NAME
RIGHT BREW
SETTINGS
YOU WILL MODIFY AN
EXISTING RECIPE
DOES THE GRINDER HAVE THE
NAME IN ITS MEMORY?
FOLLOW INSTRUCTIONS
ON THE RECIPE CARD
HAVE YOU RECEIVED A RECIPE CARD
CONTAINING THE NEW RECIPE?
OR
OR
NO
NO
DON'T KNOW
NO
YES
YES
YES
DON'T
KNOW
RECIPES
This diagram allows for the creating, modifying,
or viewing of recipes in the brewer.
P2369
29877-3 062005
