background image

Page 18

PROGRAMMING THE BREWER (cont.)

BREW OZ (SETTING OR ADJUSTING BREW VOL-

UMES) 

  This function allows adjustment of the brew vol-

umes for each batch. The indicator signifies volume 

in ounces per batch.

Procedure for modifying recipes - brew ounces: 

Range: 10.0 oz to 400 oz for all three batch sizes

1.  Press and hold upper right hidden switch (®) until 

the display reads UNITS. Release the switch, then 

press and release switch until the display reads 

REVIEW RECIPES.

2. Press YES to proceed. The display should now 

read:

 

NO NAME, along with MODIFY, SHOW and NEXT 

(SINGLE brewers)

 

NO-NAME LEFT, along with MODIFY, SHOW and 

NEXT (DUAL brewers).

3.  Press and release NEXT to advance to the desired 

coffee name to be modified.

4.  Press and release MODIFY. The display should 

read BREW OZ: and a batch light will be blinking. 

Press and release the batch size to be modified.

5. Using (-) and (+), set the amount of brew water, 

in ounces, to be dispensed over the grounds for 

that particular batch size.

6.  When finished, press another batch size and repeat 

step 5 for that size for each batch size to be modi-

fied. Continue setting all batch sizes.

7.  When finished setting all batch sizes, press and 

release DONE. The display should read 3 BATCH 

SIZES DONE?

8.   If the three batch sizes are not correct, press and 

release NO to return to the BREW OUNCES setup 

screen and repeat steps 5, 6 and 7.

9.  If the three batch sizes are correct, press YES. This 

will advance to the % BYPASS function. Another 

alternative is to press and release the ON/OFF 

switch (either on DUAL brewers) to exit the BREW 

OZ setup and return to the MAIN SCREEN.

REVIEW RECIPES?

 NO 

YES

EXIT TO

NEXT FUNCTION

SCREEN

NO-NAME LEFT

MODIFY SHOW NEXT

NO-NAME

MODIFY SHOW NEXT

DUAL

BREWERS

SINGLE

BREWERS

BREW OZ. XX.X

 (-) DONE (+)

3 BATCHES DONE?

 NO 

YES

% BYPASSS XX.X

 (-) DONE (+)

SEE MODIFYING

BYPASS PERCENTAGES

ON THE FOLLOWING PAGE

OR PRESS AND RELEASE

ON/OFF SWITCH TO EXIT THE 

BREW OZ: SETUP AND RETURN

TO THE MAIN SCREEN

(COFFEE NAME)

MODIFY SHOW NEXT

THAT WAS THE 

LAST RECIPE

WHEN THE LAST COFFEE 

NAME IN BREWER'S MEMORY 

IS DISPLAYED, PRESSING 

NEXT WILL EXIT AND THE 

DISPLAY WILL THEN READ:

ADVANCES TO ALL OTHER

COFFEE NAMES PROGRAMMED 

IN THE BREWER"S MEMORY

41342 080108

Содержание DUAL SH DBC WITH SMART FUNNEL DUAL068000





































Отзывы: