SKU 99938
For technical questions, please call 1-800-444-3353.
Page 2
read the entIre Important
saFetY InFormatIon section at the
beginning of this document including
all text under subheadings therein
before set up or use of this product.
mounting
This Motion Detector can be mounted on a
1.
drywall or solid surface.
The weight of the batteries may not permit
2.
mounting at an angle.
The Motion Detector is designed to operate
3.
when placed in a dark area or room.
Inspect the area where the Motion Detector
4.
is to be mounted for hidden wiring or piping.
Using the Mounting Bracket (2) (see Fig. 1)
5.
as a template, drill two 1/8" mounting holes.
Insert the two supplied plastic Wall Anchors
a.
(5) into the holes if mounting onto drywall.
Place the mounting bracket against the
6.
mounting surface aligning the holes.
Insert each screw through the holes in the
7.
mounting bracket, and screw all the way into
the Wall Anchors (5) or solid stud surface.
The Mounting Bracket should now be se-
8.
curely mounted on the surface. Pull firmly to
be sure bracket is secure.
operation
Turn Motion Detector over and slide the battery
1.
compartment cover downward (see Fig. 2.)
Install the four 1.5V AA batteries. (Supplied.)
2.
The proper polarity is shown in the battery
a.
compartment.
Replace the battery compartment cover.
3.
The Motion Detector mounting clips can now
4.
slide into the Mounting Bracket (2) clips.
The top of the Motion Detector has a three
5.
position switch:
The left position turns the six LEDs manu-
a.
ally on, and stays on.
The center position turns the LEDs off, and
b.
stays off.
The right position enables the “Auto” feature.
c.
Any movement within the specified area
d.
turns the six LED lights on for one minute.
To replace batteries or change switch posi-
6.
tion, slide Detector upward and out from the
mounting bracket.
parts lIst
part
description
Qty.
1
Motion Detector
1
2
Mounting Bracket
1
3
AA Alkaline Batteries, 1.5V (Supplied)
4
4
Screws: 1-3/4"L x 1/8" Dia. (Not Shown)
2
5
Wall Anchors: 1-3/16"L x 3/16" ID (Not Shown)
2
record serial number Here:
note:
If product has no serial number, record
month and year of purchase instead.
note:
Some parts are listed and shown for illustra-
tion purposes only, and are not available
individually as replacement parts.
please read tHe FolloWIng
careFullY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS
PROVIDED THE PARTS LIST AND ASSEMBLy DIAgRAM
IN THIS DOCUMENT AS A REFERENCE TOOL ONLy.
NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANy REPRESENTATION OR WARRANTy OF ANy
KIND TO THE BUyER THAT HE OR SHE IS qUALIFIED
TO MAKE ANy REPAIRS TO THE PRODUCT, OR THAT
HE OR SHE IS qUALIFIED TO REPLACE ANy PARTS OF
THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR ExPRESSLy STATES THAT ALL REPAIRS
AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
By CERTIFIED AND LICENSED TECHNICIANS, AND NOT
By THE BUyER. THE BUyER ASSUMES ALL RISK AND
LIABILITy ARISINg OUT OF HIS OR HER REPAIRS TO THE
ORIgINAL PRODUCT OR REPLACEMENT PARTS THERETO,
OR ARISINg OUT OF HIS OR HER INSTALLATION OF
REPLACEMENT PARTS THERETO.
Fig. 1
Mounting
Bracket
Clips
Fig. 2
Back of Detector
