background image

SKU 94531        

 For technical questions, please call 1-800-444-3353 

PAGE 2

SPEcIFIcAtIONS

Electrical Requirements

AC Adapter Power Input: 120 VAC / 60 Hz

AC Adapter Power Output: 15 VDC

AC Adapter Type: Class II Transformer

AC Adapter Plug Type: 2-Prong (Non-Polarized)

AC Adapter Power Cord Type: 22 AWG x 2C x 6 Ft.

Camera Dimensions

4-1/2” W x 7-7/8” H x 2-1/4” Depth

Camera Specifications

Power Input: 15 VDC / Power Consumption: 10 Watts

380 Line Resolution / Six Infrared LED’s

13 Ft. (4m) Maximum Night Viewing

Call & Talk Push-Button Control

Monitor Dimensions

10-3/8” W x 8-3/8” H x 3” Mounting Depth (From the Wall) 

Monitor Specifications

4” CRT Diagonal (Flat Kinescope) / Black & White Screen

380 Line Resolution / Power Input: 15 VDC

Power Consumption: 10 Watts

Features

Auto-Off Operation (60± Seconds) / Built-In Infrared Night Vision

Outdoor Audio Limited (Inside Talking Cannot Be Heard by Caller, i.e., Mute Capable)

Up to 3 Indoor Monitors Possible on One Camera / Wire Camera Input

Button Controlled Door Opener (Requires Existing Electric Lock), Indoor Alarm Button

SAVE tHIS MANuAl

You will need this manual for the safety warnings and precautions, assembly, 

operating, inspection, maintenance and cleaning procedures, parts list and assembly 

diagram.  Keep your invoice with this manual.  Write the invoice number on the inside 

of the front cover.  Keep this manual and invoice in a safe and dry place for future refer-

ence.

gENERAl SAFEtY RulES

 WARNINg!  Read all instructions 

Failure to follow all instructions listed below may result in electric shock, 

fire, and/or serious injury.

SAVE THESE INSTRUCTIONS

grounded tools must be plugged into an outlet properly installed and 

grounded in accordance with all codes and ordinances.  Never modify the 

plug in any way.  Do not use any adapter plugs.  Check with a qualified 

electrician if you are in doubt as to whether the outlet is properly grounded.

  

If the product should electrically malfunction or break down, grounding provides a 

low resistance path to carry electricity away from the user.

Avoid body contact with grounded surfaces such as pipes, radiators, rang-

es, and refrigerators.  

There is an increased risk of electric shock if your body is 

grounded.

Do not expose electrically powered products to rain or wet conditions.  

Water entering an electrically powered product will increase the risk of electric 

shock.

Do not abuse the Power cord.

  

Never use the Power cord to pull the Ac 

Adapter from an outlet.  Keep the Power cord away from heat, oil, sharp 

1.

2.

3.

4.

REV 07b

Содержание 94531













Отзывы: