Bunker Hill Security 91309 Скачать руководство пользователя страница 3

Page 3

SKU 91309

For technical questions, please call 1-800-444-3353.

9.

Maintain products with care.  Keep products clean for better and safer performance.
Follow instructions for changing accessories. Inspect cords periodically, and if
damaged, have them repaired by an authorized technician.

10.

Disconnect power. Unplug the system when not in use.

11.

Stay alert.  Watch what you are doing, use common sense. Do not operate any
product when you are tired.

12.

Check for damaged parts.  Before using any product, any part that appears
damaged should be carefully checked to determine that it will operate properly and
perform its intended function. Check for any broken parts or mounting fixtures, a
leaking battery, loose connections, damaged seals on the Camera, and any other
condition that may affect proper operation. Any part that is damaged should be
properly repaired or replaced by a qualified technician. Do not use the product if any
switch does not turn On and Off properly.

13.

Replacement parts and accessories.  When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this product. Approved accessories are available from Harbor
Freight Tools.

14.

Do not operate product if under the influence of alcohol or drugs.  Read warning
labels if taking prescription medicine to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the product.

15.

Maintenance.  For your safety, service and maintenance should be performed
regularly by a qualified technician.

16.

Pacemaker Warning.  People with pacemakers should consult their physician(s)
before using this product.  Electromagnetic fields in close proximity to a heart
pacemaker could cause interference to or failure of the pacemaker.

Note: Performance of this product may vary depending on battery power.

Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be under-
stood by the operator that common sense and caution are factors which cannot be
built into this product, but must be supplied by the operator.

Unpacking

When unpacking, check to make sure the parts listed on page 7 are included.  If any parts
are missing or broken, please call Harbor Freight Tools at the number on the cover of this
manual as soon as possible.

Содержание 91309








Отзывы: