Page 22
For technical questions, please call 1-888-866-5797.
Item 62463
SAFET
y
ADV
ANCED
OPERA
TION
SETUP
BASIC
MAINTENANCE
TROUBLESHOOTING
Clock Settings
System > General - NTP (Network Time Protocol)
1. The DVR must be connected to your network
for this feature to work.
(Go to Connect
DVR to Network on page 28)
Figure AC
2. After network connection is set up:
a. Click NTP
Setup.
b. Select
Enable.
c. Choose
Server Address.
d. Choose
Time Zone.
e. Click
Apply
then
OK.
f. Click
Update Now
.
The DVR's clock will be synchronized to
Coordinated Universal Time (UTC).
Changes will be saved when you
click Apply then OK.
Changes will not be saved if you click
Exit or right click on screen.
User Management Settings
System > Users - Set up additional users' passwords and permissions.
To set password for main user, go to Password Settings on page 15.
Figure AD
Set up Additional Users
1.
User Enable:
Select
Enable.
2.
User Name:
Enter User Name (up to 8 characters).
3.
Password Enable:
Select
Enable
or
Disable
.
a.
Password:
Enter Password (up to 6 characters).
b.
Confirm:
Enter Password again to confirm.
Changes will be saved when you
click Apply then OK.
Changes will not be saved if you click
Exit or right click on screen.
4. Select
User that was just named
and click
Permission.
a. Click in boxes to select specific permissions.
b. Click
All
to select all permissions.
c. Click
Clear
to remove all permissions.
Figure AE
Changes will be saved when you
click Apply then OK.
Changes will not be saved if you click
Exit or right click on screen.
5. Repeat steps above for other users.
