Page 7
For technical questions, please call 1-888-866-5797.
Item 62367
Assembly
1. Thread the Antenna into the
Antenna Connector on the
back of the Camera.
2. Adjust the Antenna to its vertical
position for best transmission.
Before Mounting
1. When planning mounting
location and angle:
a. Verify that installation surface
has no hidden utility lines before
drilling or driving screws.
b. Take into consideration the
length of the Camera and Power
Adapter’s cords. Route the cords
so as to avoid a tripping hazard.
c. Do not install where there are thick
walls or other obstructions between
the Camera and Receiver.
d. Select a location high enough so that
it is out of reach of children, but still
covers the desired viewing area.
e. Do not install the Camera
facing out of a window.
f. Make sure no strong light will
shine directly into Camera Lens.
g. Make sure location will remain within
the Camera’s Operating Temperature.
2. Test the Camera’s function in its
intended location
before mounting:
a. Connect the Power Adapter’s cord
to the Camera’s Power cord.
Figure C
b. Plug the Power Adapter
into a 120VAC outlet.
c. Verify that there is an image
on the Receiver.
3. When the mounting location
has been chosen:
a. Unplug the Power Adapter’s
cord from the Camera.
b. Remove the Camera from
the Mounting Bracket.
c. Using the Base as a template, mark
locations of mounting holes on
mounting surface.
(See Figure D.)
Mounting
Holes
Base
Mounting
Bracket
Figure D