Bungard StenPrint 3000, Инструкция по эксплуатации

Страница: 20 / 31

21 Instruction manual
© 22.02.2017 Bungard GmbH & Co. KG
4.7.1.2
Stencil clamp frame
With the stencil clamp frame, it is possible to hold and clamp “prototype stencils”.
903.204 - Stencil clam p fr am e
It is meant for holding the stencils by clamping them from two sides.
The clamp frame was developed to holding so-called “prototype stencils”.
o
These are frequently available from PCB suppliers at low cost.
Due to the fact that the “prototype stencils” are slightly larger than the PCB to be printed
and that they have no holes for holding them, the stencils are held in place in the clamp
frame by two clamps.
Attention
No guarantee can be provided that all available “prototype stencils” can be
held in place with the stencil clamp frame.
Important
The magnetic holders are required to use the stencil clamp frame in the
stencil printer for double-sided printing.