Manual-SMT 3000 ECO LIGHT Plus-en
page 17 / 18
Customer service
We offer a factory customer service for Bungard SMD devices. If repairs are required, please send the
device to your specialist dealer or area representative or directly to us.
We use an RMA form to accept a repair shipment. Please request this form from us before returning
the goods. Without an RMA, we cannot guarantee that repairs will be carried out properly. A meaning-
ful description of the fault is essential for quick and inexpensive repairs.
Please use the RMA form for this.
Guarantee
Prior to delivery all machines undergo an operational test on function and continuous strength. On the machine
we provide a bring in warranty of 12 months from the date of purchase in respect of defects in material and work -
manship. We offer a warranty at our choice by replacement of faulty parts or by repairing the machine in our fact -
ory. Old parts shall become our property.
Disclaimer of warranty
Bungard GmbH & Co.KG reserves the right to change or enhance its machines or machine specifications according
to its judgement, if necessary. Bungard cannot be held responsible to implement aforesaid changes into machines
sold already.
Bungard products and services are liable to the current prices and conditions, which are subject to change.
The instructions and definitions in this document are also subject to change and mark no assurance on the part of
Bungard.
This manual contains informations of the Bungard SMT3000-ECO and is the translated English version.
Please regard the “Sales terms and delivery conditions”. These are available after fulfilment of the contract. We
don't furnish a guarantee or warranty in cause of damages at material or hurts of people because of
Incorrect use of the machine
Wrong setup, installing and operating of the machine or incapable service
Use of the machine with defective safety equipment
Non-observance of the service manual in regard to transport, stocking, setup, installation and service of the ma-
chine
Unlicensed modifications at the machine
Incorrect or incomplete repairs
Destructive force effect at the machine in cause of foreign objects or external use of force
Use of non-original spare parts
normal wear parts.
We cannot accept subsequent claims from damage or destruction of work pieces worked on in the machine, be -
cause we have no knowledge or control over the operating conditions at your site. This is valid in a general manner
also for requirements from damage to articles, buildings and persons as well as the environment.
We do not warrant that the function of the machine will meet the customer's requirements or that the operation
of the machine will to this regard be error free.
In no event will we be liable to the customer for any incidental, consequential, or indirect damages of any kind, in -
cluding loss of profit and prosecution for environmental pollution, even if we could have been aware of the possib -
ility of such damages.
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany
Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: [email protected]
