rdc-30-manual-en
Page 9 /
Screen # Description
Display
22
If you click
5
in menu 15 the screen for adjusting the waiting
time at bottom position (dipping time) shows up. You can enter
max. 99 hours, 59 minutes and 59 seconds and at least
00:00:00. Press
C
to change to edit mode. Insert your desired
dipping time. You can correct your input by pressing
CE
and
confirm your input with
Enter
. After pressing
Enter
you can de-
cide whether you want to have your liquid stirred or not. After in-
serting
1
or
2
you will automatically return to screen 14.
23
If you click
6
in menu 15 the screen for adjusting the waiting
time at top position (drip off time at virtual end switch) shows up.
You can enter max. 99 hours, 59 minutes and 59 seconds and
at least 00:00:00. Press
C
to change to edit mode. Insert your
desired drip off time. You can correct your input by pressing
CE
and confirm your input with
Enter
. After pressing
Enter
you can
decide whether you want to have your liquid stirred or not. After
inserting
1
or
2
you will automatically return to screen 14.
24
Clicking
7
in menu 15 you can enter iterations for the selected
table position. You can enter between 1 and 1000 iterations.
Press
C
to change to edit mode. Insert your desired iterations
and confirm with
Enter
.
Now we have completed all settings for one table position. Now
we need to do the same with the all other table positions you
want to use in this sequence. After having finished we go back
to the main menu (screen 12).
25
If you press
2
in the main menu (screen 12) you can arrange the
sequence of the vessels you want to dip your object in. Insert the
desired vessel position you want to start the sequence with and
confirm with
Enter
. You can assign up to 9 sequences (s1 – s9).
For each sequence you need to assign a vessel. If you want to
make e.g. only 3 sequences, you insert a
0
for sequence 4 (s4) and
confirm with
Enter
. After that the menu returns to screen 12.
26
Selecting
3
in main menu (12) you can enter iterations for the
whole dipping sequence.
You need to enter at least one and at most 1000 iterations.
27
Now we have entered all settings and can continue with the actual
dipping process. We recommend to run the machine first without
the liquid in the vessels to check speed and end positions. When
you click
4
in the main menu, the machine will start the dipping se-
quence. First it will drive to the correct table position and then start
the drip-off-time.
Stir
1.on
2.off
Stir
1.on
2.off
sequenz of tools
s1=tp__
1-6 // 0=not used
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany
Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: [email protected]
t. up: 00:00:05
00:00:00
Successively enter
(E=ok /max9/CE=k)
Iteration: ___
OK=Enter
(min.:1 / max.: 1000)
Iteration=1
_
OK=Enter
(min. 1 / max. 1000)
wait
stir on
Timer 00:00:00
T.down: 00:00:05
change=C or OK=Enter
t. down: 00:00:05
00:00:00
Successively enter
(E=ok /max9/CE=k)
time up: 00:00:09
change=C or OK=Enter
Iteration: ___
change=C or OK=Enter
(min.:1 / max.: 1000)
Iteration=_
change=C or OK=Enter
(min. 1 / max. 1000)
