BB Trainer Revision 3.doc
28
1
Selecting Firing Order
If your launcher is set up in bi-directional mode you need
to know which launcher tube will fire first. This can be
accomplished in two ways.
Method 1
Conduct the In House Test (page 23).
Press the
“LAUNCH”
key and observe
which servo is activated. The other launch assembly
will fire next.
Orient the launcher to fire that tube first, or, repeat to
cycle to the other launch assembly.
Method 2
Reset the transmitter.
Press the
“Send/Clear”
key,
Then press the
“Sound”
key.
The launcher assembly closest to the receiver will fire
first.
Send
Clear
1
Duck
BB Trainer Revision 3.doc
29
Field Setup
Your Bumper Boy is a flexible tool that will provide realistic
training situations to prepare your dog for hunting and
competition. The following step-by- step procedures will
assist you to safely and effectively use the Bumper Boy in
your training program.
Move Launcher to Gunner Station
Select a flat surface with sparse cover. Be sure there
are no overhead tree branches that may interfere.
Deploy the launcher legs.
Align the firing tubes to orient them to the area of the
fall.
Firmly push the launcher legs into the ground to
provide a stable launching platform.
Check the firing order if you have set the launcher to in
the bi-directional mode. See page 28, “Selecting
Firing Order”.
CAUTION
Inspect the line your dog may run to the area of the fall
for holes, hidden ditches or other obstacles that may
injure your dog. Be sure there is no vegetation or other
obstructions overhanging the location you have
selected for the launcher or in the line of flight of the
bumper
.
