3
1 SAFETY RULES
Ensure that electrical connection & grounding made correctly.
Main safety rules and standards to be assured for the machine during installation & running.
The use and maintenance of the device not to made by persons other than authorized personnel
Ensure the work area clean and tidy working environment.
Machine does not work when the cover is closed.
Do not open the device during operation
To check cutting disc rotation of the engine for a few seconds, do not open the cover fully before the end
of the process
Use gloves when cutting the sample.
Adequate lighting should be provided during work time. Ensure the device for replacing the broken lamp
immediately when necessary.
In case of any danger during operation, use the emergency stop button (emergency) immediately.
Cutting disc should be careful located. The disc are at risk of fracture and do not use cutting discs
definitely broken and deformed.
Assure complete and accurate periodic maintenance
To ensure the long life of the machine use only original spare parts.
Remove the mains power when not in us
2 DESCRIPTION
Sturdy table model for sectioning metals, ceramics ,mineral samples
Corrosion resistance steel top cover with see-through hood
Special aluminum casted heavy robust base
Easy use twin cam actuated vises for holding samples
All inside parts made from stainless steel or chromium plated steel
Splash proof during cutting
Cooling by two high flow water jets to provide optimum cutting
Cutting action provided by moving cutting wheel on specimen or moving sliding table to cutting wheel
40W light illuminator protected from water in specially isolated cover fixed inside the cover to obtain
safe and clear illumination on cutting area
Separately mounted recirculation coolant tank with large drain
57 lt capacity coolant tank, suitable filtering part provided to filter the slugs formed during cutting.
2.1 Technical Specifications
Machine dimensions
900 X 980 X 700 mm
Case dimensions(coolant system included) 1400 x 1000 x 850 mm
Weight (net/gross)
160 / 200 kg
Motor
3 KW, AC - 380 Volt - 2800 rpm
Cutting system
Manual (movement of sliding table with part against cutting wheel or
movement of cutting wheel against part to be cutted)
Table dimensions
T-slotted clamping table( 370 x 173 mm) (1 pcs)
Clamping devices
Fast cam locking vises (2 pcs)
Cutting capacity
150 mm dia
Cutting wheel dim’s
250x32x1,6 (1,5) mm
Coolant pump
380 Volt, AC, 0,12 KW
Coolant reservoir dimensions
600 x 400 x 300 mm, 57 lt capacity
Lamp
24Volt,40Watt
2.2 Standard Accessories
Complete cooling system (tank, recirculation pump and filter)
Cooling system hoses and clips
Flat wrench and tightening pin 250 mm (or 300 mm)
Cutting discs (5 pieces)
Cutting fluid (2 liters)
Fast cam locking vise clamping devices (2 pcs)
