3
Parts Description:
This section describes each part and any special features of each part that need to be noted
to assist with installation. All parts will be referred to during installation by the names used
in this section.
The RFI base:
The base of the RFI enclosure that holds the filter has a couple of features to
note. The first is the circular hole on the back of the base, this hole is where the RFI tube will
snap into the base and hold secure the air filter. The second important part of the base is the
foam secured to the inlet of the box, which is to seal tightly to the side of the truck.
The RFI Lid:
The lid is very easy to remove for filter maintenance, notice the tongue and
grove formed between the housing base and the lid needs to be properly lined up for a good
seal. The latch mounts on the lid should always match up with the latch mounts on the base.
Parts Description
