80
OPERATING THE HDGT
Vehicle Settings allow you to change temperature warning and
communication protocol settings.
Set Warning Levels
Configure the HDGT to provide visual and/or audio warnings for
the following parameters. Refer to OEM vehicle specifications to
determine the values to use when setting safety levels.
Pyro 1 Temperature Level
The default setting for this
option (1250°F) is a starting
point and assumes that Pyro 1 is
installed in a pre-turbo location.
Pyro 2 Temperature Level
The default setting for this
option is Off because most
vehicles do not have two
OEM pyrometers.
Engine Coolant Temp Level
The default setting for this
option is 220°F.
Boost Level
By default option is set to Off.
Maintaining low boost levels will
allow for maximum efficiency,
and reduce engine stress.
A boost warning will remind you
to maintain low boost pressure.
Transmission Temp Level
The default setting for this
option is Off because many
vehicles do not broadcast
transmission temp information.
If an OEM transmission
temperature option is not
available, the HDGT can provide
that information through an
aftermarket sensor.
Oil Temperature Level
The default setting for this
option is Off because many
vehicles do not broadcast oil
temperature information.
If an OEM oil temperature option
is not available, the HDGT can
provide that information through
an aftermarket sensor.
Speed Limit
This feature does not change
the speed limiter; it is simply a
speed limit warning.
Use either the same Speed Limit
set in the Driving Coach or a
slightly lower one to remind the
driver to slow down.
MAIN MENU
>>
SPECIAL FEATURES
>>VEHICLE SETTINGS
