50 ST
ATE GT
DIESEL
26
PHYSICAL INSTALLATION
Detailed Instructions
1. Connect The OBDII Adapter Plug to the OBDII Port. See page 6 for a detailed description of the different parts of the OBDII
adapter plug.
• Find the OBDII port in your vehicle. As shown in the illustration, the specific location of the port can vary between different vehicles, but it is always
somewhere under the driver’s side dash. The OBDII port will
have the same shape as the end of the adapter plug.
• Once you have found the port, simply connect the adapter
plug to it.
2. Connect The Power Cable. The power cable is not
really optional if you want to enjoy the originally
designed functions of the GT. It is only optional under
one of the following circumstances:
You do
not
want to keep the GT permanently installed and
plan on disconnecting it when you are not actively using the
unit.
You
want
the GT to remain on at all times, regardless of
the effect that this could have on your car battery
You prefer physically switching the GT on and off and do
not want it to automatically power down when you turn
the key to the off position.
Otherwise, in order for the GT to work as originally designed, it is very important for the power cable to be installed as de-
scribed below:
1. Locate an ignition fuse.
• An ignition fuse is one that is controlled by the position of the key.
• Sometimes we call this a “key-on” or “key-off” fuse.
• The fuse that controls the front windshield wiper is usually perfect, but any fuse that turns off when the key is turned off will work just fine.
• Every vehicle is different. There is no way to provide wiring diagrams for all vehicles. You will be able to find the information for your vehicle
in the owner’s manual or online.
• Some vehicles have a fuse box inside the cab. If your
vehicle does not have a fuse box inside the cab, you will
need to locate the fire wall and connect the power cable
to the fuse box under the hood.
2. Connect the power cable to the fuse.
• You may have received a fuse tap with your GT. See below
for an illustration and instructions on using the fuse tap to
install the power cable.
• You can also simply put the power cable into the fuse box
along with the fuse that is normally installed in that loca-
tion. See the diagram and picture for more information.
• If you did not receive a fuse tap, but prefer to use one to
install your power cable, you can purchase one at your
local auto parts store. Be sure to ask for installation
instructions if none are included with the fuse tap.
Using the Fuse Tap and Spade
1. Find and pull the fuse that you are going to use to insert the GT Power Cable.
2. Slip the fuse tap over the prong on the fuse.
3. Fit the spade over the fuse tap and crimp them together with pliers.
4. Put the tapped fuse back into the fuse box.
OBDll Port Location
All OBDll ports are located under the
dash on the drivers side of the vehicle.
OBDII Plug
Main Cable
Power Wire
OBDII Adapter Plug Installation Diagram
GT
Содержание 50 State GT Diesel
Страница 1: ...50 STATE GT DIESEL i Doc version 1 1...
