Bulls 22-15-1078, Перевод оригинальной инструкции по эксплуатации

Страница: 146 / 234

MY22B01 - 12_1.0_26.08.2021
145
Cleaning and servicing
7.4.3 Pannier rack
1 Dry pannier rack with a cloth.
2 Spray pannier rack with spray wax and leave to
dry.
3 Wipe pannier rack with a cloth.
4 Protect chafing points on panniers with
adhesive film. Replace worn adhesive film.
5 Care for coil springs with silicone spray or wax
spray from time to time.
7.4.4 Mudguard

Depending on the mudguard material’s
requirements, apply hard wax polish, metal
polish or plastic care product as per the
product instructions.
7.4.5 Servicing the kickstand
1 Dry kickstand with a cloth.
2 Spray kickstand rack with spray wax and leave
to dry.
3 Wipe down kickstand with a cloth.
4 Lubricate the kickstand joints with spray oil.
7.4.6 Stem
1 Spray painted and polished metal surfaces
with wax spray and leave to dry.
2 Wipe away any wax residue with a cloth.
3 Apply silicone or Teflon oil to the stem shaft
tube and the quick release lever pivot point
with a cloth.
4 If you have a Speedlifter Twist, also apply oil to
the unlocking bolt using the groove in the
Speedlifter body.
5 Apply a little acid-free lubricant grease
between the stem quick release lever and the
sliding piece to reduce the quick release lever
operating force.
6 If you have a stem with a cone clamp, apply a
new protective layer of assembly paste onto
the stem and fork steerer contact point once a
year.
7.4.7 Handlebars
1 Spray painted and polished metal surfaces
with wax spray and leave to dry.
2 Wipe away any wax residue with a cloth.
7.4.8 Handle
7.4.8.1 Rubber handles
1 Apply talcum powder to sticky rubber handles.
Notice
 Never apply talcum powder to leather or foam
handles.