Bulls 22-15-1054, Руководство пользователя, Страница: 116 / 321

MY22B01 - 22_1.0_27.08.2021
115
Operation
6.5.11.5 Adjusting the ROCKSHOX fork coil spring with spacer for pre-tensioning
Only applies to pedelecs with this equipment
1 Put on normal cycling clothing (including
baggage).
2 Ask someone to hold the bicycle.
3 Stand on the pedals. Allow the damper to
deflect three times. Sit or stand on the pedelec
in a normal riding position.
4 Ask your helper to push the O-ring downwards
until it reaches the top of the dust wiper seal.
Figure 134: Moving the O-ring on the suspension fork
5 Get off the pedelec without allowing it to
deflect.
6 Note distance between dust wiper and the O-
ring. This distance is the sag.
Figure 135: Sag (1)
7 Check the sag.
8 If the desired sag is not achieved, the spring
preload must be adjusted internally and/or the
coil spring replaced. Contact specialist dealer.
1
Setting Sag
Prohibited >30%
High sensitivity 20–30%
Low sensitivity 10–20%
Prohibited <10
Table 43: Recommended sag
Figure 136: Mandatory sag range (green) and prohibited
sag range (red)