Bullmer A200-2, Руководство по эксплуатации

Страница: 6 / 16

Chapter II Use matters needing attention
Although you are very familiar with inkjet plotter, but before operating this
machine also please read the following precautions:
2.1
the use of the machine environment
Plotter work and storage temperature range is: 15 to 35 degrees Celsius,
not in the glare, radiation or heat storage or use of this machine.Plotter work at
room temperature humidity range is: 20% - 20%, do not use in wet or humid and
dusty places plotter, because once the moisture condensation inside the machine,
dust entering the plotter and cause short circuit or poor contact and seriously affect
the plotter to avoid performance in strong electromagnetic interference or put
something magnetic beside the plotter
2.2 other considerations
*Before access or disconnect the power supply, make sure the machine is in
the off state.
*Avoid unnecessary frequent on and off the machine, so as not to affect the
performance of electronic components.
*In the process of drawing, don't put the body near the plotter, don't put
your hands on track
*If need to access or adjust the transmission signal, please confirm the
power of the computer and plotter switches have been closed.