BulletHD Pro 1080P, Руководство пользователя

Страница: 6 / 20

Bullet HD OVERVIEW
①
LED
②
Power / Shutter
③
Rear Cap
④
Mode Switch
⑤
USB
⑥
Plug MicroSD Card Slot
⑦
Battery
⑧
Microphone
⑨
1080P / 720P Mode Switch
⑩
Stabilizer / Firmware
INITIAL SET UP
1. Make sure the Bullet HD is OFF before adding or removing the memory
card!
2. Screw out the rear cap (open) located at the back of the Bullet HD
③
.
3. Install a Micro SD memory card (max up to 32GB) into the rear slot. To
insert the micro SD card, slide the micro SD card into the card slot on the
back of the Bullet HD with the card label facing down. The SD card will click
into place once it is inserted past flush with the Bullet HD. Use your fingernail
to do this. Then screw in the rear cap till is complete lock.
4. If “no” SD Memory card is inserted into the Bullet HD, a Red/Blue LED light
on top of the Bullet HD will blink.
5. The Micro SD memory cards must be clean (no images from other sources).
If you are using the Micro SD memory card from other devices, please make
sure to format the SD memory card in your computer prior to use in the Bullet
HD. New cards are good to use straight from the package.