2
While gently pushing handle
down, pull Safety Lock pin out,
then lift handle.
Place product on table.
Bring handle down until
blade touches material.
Push handle down until
material is completely cut.
3
DO NOT USE ON HIGH PRESSURE LAMINATE OR SOLID WOOD!
USING YOUR SHEAR
1
EZ FLR CUT GUIDE
Max Thickness = 5/8” or 15mm
Material List
Laminate Flooring
Engineered Wood
Commercial Vinyl
Luxury Vinyl Tile
Parquet
PVC Tile
Rubber Tile
Soft Plastic
Your EZ Shear cuts a wide variety of products. Please refer to cut guide below.
Note: Approved materials
may vary in density and
hardness. If extreme pressure
is required to cut a product, it
may result in damage to your
machine. Please contact Bullet
Tools before proceeding.
Warranty is void if an
unapproved product dam-
ages the machine.
PRT-INS-QEZA REV.G.6.17 ©2017 Bullet Tools
Hayden, ID USA • 208-772-0175
For full manuals, warranty
info, accessories, & tips on
using and maintaining your EZ
Shear, go to BulletTools.com
or scan the QR code below.
