www.bullard.com
Component Concept
The FAMB2 airline respirator consists of three Bullard components: half-
mask, breathing tube assembly and air supply hose. All must be present and
properly assembled to constitute a complete NIOSH-approved respirator (see
Figure 2).
1. Half-mask with cradle headband and elastic straps
2. Breathing Tube Assembly
3. Air Supply Hose
�
WARNING
Failure to use complete NIOSH approved Bullard components and
replacement parts voids approval of entire assembly. Basic parts are
listed on the NIOSH Approval Label on Page 8.
Mask/Fitting Assemblies
Half-Mask Respirator with Breathing
Tube Assembly:
Comfortable silicone half-mask with breathing tube that
connects the mask to air supply hose.
Air Supply Hose Options
Connects breathing tube to air source supplying clean
breathable air.
2
Component Concept
For use with breathing air
compressors/continuous-flow
For use with ambient air
pumps/continuous flow
Model FAMB230
Model FAMB235
For use with breathing air
compressors/continuous-flow
For use with ambient air
pumps/continuous flow
V10 – 3/8" I.D. Hose
4696 Starter Hose
545 Series Extension Hose
Extension hose available in 25, 50
and 100 foot lengths with a variety
of quick-disconnect fitting styles and
materials. See parts list for details.
V20 – 1/2" I.D. Hose
V20 Starter/
Extension Hose
Available in 50 and 100 foot lengths
with a variety of quick-disconnect
fitting styles and materials. See
parts list for details.
Figure 2
1. Half-mask
Facepiece
2. Breathing
Air Tube
Assembly
3. Air Supply
Hose
Clean Breathable Air Source
Supplying Grade “D" or Higher
Air Quality (See Breathing Air
Requirements on page 5)
