Bull Cedoc NovaScale Master 5.1, Инструкция по установке и руководство администратора

Страница: 68 / 92

58
NovaScale Master 5.1 Server Add-ons - Installation and Administrator's Guide
NSMasterLSICIM
check_LSICIM
check_LSICIM uses the following shell (PERL) command:
Usage
check_LSICIM –H <host> [-C <ctrlname>]
-H, --hostname <host> Hostname or IP address of target to check
-C, --ctrlname <ctrlname> Name of the controller to check
Note:
The name of the controller must be protected with a quote if the name contains blank
characters.
Return code
”OK” (0), ”WARNING” (1), ”CRITICAL” (2), ”UNKNOWN” (3)
•
”OK”:
All ”Controllers” run normally.
•
”WARNING”:
At least one ” Controllers” is in a ”WARNING” state.
•
”CRITICAL”:
At least one ” Controllers” is in a ”CRITICAL” state.
•
”UNKNOWN”
All other types of processing errors (bad parameter, no response, etc
…
).
Note:
In the case of multiple errors, the global state will be the worst one; ”CRITICAL” >
”WARNING” > ”OK”.
Output
A string indicates the state of mirroring followed, where applicable, by concerned
component error states (controller, Logical Device, Physical Device).
If the GlobalStatus determined by the worst status of components is not OK, the state of the
component is reported with the following format:
[CT(Ct<Ct>) <CtrlName> <CtrlStatus>
[{> LD(Ct<Ct> Nu<Ldn>) <LDType> <LDStatus>[, ] …}]
[{ - PD(Ct<Ct> Ch<Ch> Tg<Tg>) <PDManufacturer> <PDModel> <PDStatus>[,
[{> PD(Ct<Ct> Ch<Ch> Tg<Tg>) <PDManufacturer> <PDModel> <PDStatus>[, ] …}]
<Ct> controller number
<CtrlModel> controller model
<CtrlStatus> worst state detected for an element of this controller (LD and PD)