Bull Cedoc Bull Escala 2104 TS4, Руководство по установке

Страница: 67 / 87

One adapter in each of two non-HACMP host systems connected
to one 2104 Model TS4s
Figure 41 shows one adapter in each of two non-HACMP host systems connected
to one 2104 Model TS4s (dual-bus mode).
1
SCSI interface card.
2
SCSI or SCSI RAID adapter of one of these types:
v
PCI Dual-Channel Ultra3 SCSI Adapter (type number 4-Y, feature code 6203)
v
PCI 4-Channel Ultra3 SCSI RAID Adapter (type number 4-X, feature code 2498)
v
PCI-X Dual Channel Ultra320 SCSI adapter (type number 5702, feature code
5712)
v PCI-X Dual Channel Ultra320 SCSI RAID Adapter (type number 5703, feature
code 5703)
Important: An RS/6000 or IBM
Eserver
pSeries computer running Linux for
pSeries uses the following to connect to the 2104 Model TS4.
v PCI 4-Channel Ultra3 SCSI Adapter (type number 4-Y, feature code 6203)
v PCI-X Dual Channel Ultra320 SCSI Adapter (type number 5702, feature code
5712)
v
PCI-X Dual Channel Ultra320 SCSI RAID Adapter (type number 5703, feature
code 5703)
Note: Connection can be to an integrated SCSI port instead of to a SCSI connector
on one of the listed SCSI adapters.
Note: The SCSI address of the adapter that is connected to the 2104 Model TS4
must be different from the addresses of the installed disk drive modules. The
SCSI address of a second adapter, which is connected to a 2104 Model
TS4, can be the same address of the first adapter but must be different from
the addresses of the installed disk drive modules on the same SCSI bus.
2104 Subsystem
1 1
2
2
Host System
Host System
Figure 41. One adapter in each of two non-HACMP host systems connected to one 2104
Model TS4s (dual-bus mode)
Appendix B. Cable configurations
39