Bull Cedoc Bull Escala 2104 TS4, Руководство по установке

Страница: 20 / 87

Removing power from the 2104 Model TS4
Removing power from a 2104 Model TS4
Note: Unless you have a particular reason to do so, do not remove power from the
host system or from the 2104 Model TS4 unless the instructions that you are
following tell you to.
Perform the following steps to remove the power from a 2104 Model TS4:
1. Verify with the customer that all operations between the 2104 Model TS4 and
the host system have stopped.
2. At the back of the 2104 Model TS4, set the dc on/standby switch
1
of each
fan-and-power-supply assembly to standby. See Figure 9.
Notes:
a. Some 2104 Model TS4s have a fan-and-power-supply assembly and a fan
assembly. The fan assembly has no dc on/standby switch.
b. A fan-and-power-supply assembly might have its CHK light on although its
dc on/standby switch is set to standby.
3. Remove the power cables
2
from the electrical power outlet and from the
back of the 2104 Model TS4. See Figure 9.
4. Perform the following steps to return power to the 2104 Model TS4:
a. Reinstall the power cables
2
.
SC000207
Figure 9. Removing power from a 2104 Model TS4
xviii
2104 Model TS4 Installation Guide