Builder BDLV 36, Инструкция по эксплуатации

Страница: 12 / 14

taking trouble to change water. Recycled water may have a little color but will not affect the
result of expected cleanliness.
Setting and cleaning wipes
Put the wipe support (3) in front of you Figure 6 , then position the pad in place taking care
to keep even the entire length, the press the entire surface to increase the effect of
scrapping.
The change of wipe will simply be made by tearing it off
Figure 7
Wipes should be replaced regularly during work according to their cleanliness. We cannot
give you an idea of the rate of change, it varies and it is at your sole discretion. These
wipes are machine washable at 40 ° C. You do not have to iron or use fabric softener or
bleach, and do not put in dryer.
Charger
The charger must not be exposed to direct sunlight, fire, or heat, as there is a risk of
explosion.
Never insert objects into the charger socket.
In case of unexpected loss or destruction of your charger, do not use any other charger
than the original, and you must imperatively contact your supplier. Otherwise any other
charger with the same characteristics would likely to destroy your device.
Never attempt to repair the cable from your charger if it is damaged, replace it.
Before you connect your charger make sure the voltage of your power outlet is the same as
indicated on the label.
Never unplug the charger by pulling the cable but take care to grasp the plug manually. It is
advised to store your charger in dry area between 5 ° C and 40 ° C maximum.
Never open your charger, potentially harmful substances may emerge and affect your
health, and short-circuit is always possible.
Battery charge level