Buick 2008 Allure, Руководство пользователя

Страница: 209 / 426

The volume level should always sound the same to
you as you drive. NONE displays if the radio cannot
determine the vehicle speed. To turn SCV off, press
this button until OFF or SPEED VOL OFF displays.
Finding a Station
BAND: Press to switch between FM1, FM2, AM,
or XM1™ or XM2™ (if equipped).
e (Tune): Turn to select radio stations.
o
SEEK
p
: Press and release the arrows to go to
the previous or the next station and stay there.
To scan stations, press and hold either arrow for more
than two seconds. SCAN or SCN displays and the
radio beeps once. The radio goes to a station, plays
for a few seconds, and then goes to the next station.
Press either arrow again or one of the pushbuttons
to stop scanning presets.
To scan preset stations, press and hold either arrow
for more than four seconds. PSCAN or PSC displays
and the radio beeps twice. The radio goes to a
preset station, plays for a few seconds, then goes
to the next preset station. Press either arrow again or
one of the pushbuttons to stop scanning presets.
The radio seeks and scans stations only with a strong
signal that are in the selected band.
SCAN: Press until SC displays. The radio goes to a
station, plays for a few seconds, and then goes to
the next station. Press again to stop scanning stations.
The radio scans stations only with a strong signal
that are in the selected band.
INFO (Information) (XM™ Satellite Radio
Service Only): Your vehicle’s radio may have an
INFO button. If the current station on the radio has
a message, the information symbol displays. Press to
see the message. If the entire message is not displayed,
parts of the message appears every three seconds.
To manually scroll through the message, press
and release the INFO button.
When a message is not available from a station,
NO INFO displays.
3-83