Getting to Know Your
Park Avenue
14
Head-Up Display (HUD)
(optional)
EyeCue
®
Head-Up Windshield Display
The HUD reflects the following informa-
tion on your windshield:
• Speedometer Reading
• Turn Signal Indicators
• High-Beam Indicator
• Check Gauges Message
The HUD controls are located in the
overhead console. To operate:
1. Start the engine, slide the dimmer
control to turn the HUD on or off.
Slide the dimmer control upward or
downward to increase or decrease
the image brightness.
2. Press the image height adjuster con-
trol up or down arrow to raise or lower
the HUD image on the windshield to
suit your personal preference.
See Section 3 of your Owner Manual.
Ultrasonic Rear Parking Assist
(optional)
URPA can help you determine how
close an object is to your rear bumper.
The URPA display is located inside the
vehicle above the rear window.
With the shift lever in REVERSE (R)
and the vehicle speed less than 3 mph
(5 km/h), the display will illuminate.
The following lights/chime indicate:
• Amber/amber/red lights flashing
(and continuous chime)
– 1 ft.
• Amber/amber/red lights
(and continuous chime)
– 20 in.
• Amber/amber lights – 40 in.
• Amber light – 5 ft.
See Section 3 of your Owner Manual.
15776 PARK AVENUE GUIDE 5/22/03 2:07 PM Page 14
