Buhler TC-Standard (+) X2, Инструкция по установке и эксплуатации

Страница: 41 / 58

TC-Standard (+) X2
9.5.2 Heat exchanger overview
TC-Standard
Heat exchanger PTS
PTS-I
2)
PTG
PTG PTV
PTV-I
2)
MTS
3)
MTS-I
2) 3)
MTG
3)
MTG
3)
MTV
3)
MTV-I
2) 3)
Version / Material Stainless steel Glass PVDF Stainless steel Glass PVDF
Flow rate v
max
1)
450 Nl/h 250 Nl/h 250 Nl/h 300 Nl/h 210 Nl/h 190 Nl/h
Inlet dew point τ
e,max
1)
65 °C 65 °C 65 °C 65 °C 65 °C 65 °C
Gas inlet temperature ϑ
G,max
1)
180 °C 140 °C 140 °C 140 °C 140 °C 140 °C
Max. Cooling capacity Q
max
150 kJ/h 90 kJ/h 90 kJ/h 95 kJ/h 80 kJ/h 65 kJ/h
Gas pressure p
max
160 bar 3 bar 2 bar 25 bar 3 bar 2 bar
Pressure drop Δp (v=150 L/h) 10 mbar 10 mbar 10 mbar 20 mbar 19 mbar 18 mbar
Dead volume V
tot
29 ml 29 ml 57 ml 19 ml 18 ml 17 ml
Gas connections (metric) 6 mm GL 14 (6 mm)
4)
DN 4/6 6 mm tube GL14 (6 mm) DN 4/6
Gas connections (US) 1/4" GL 14 (1/4")
4)
1/4"-1/6" 1/4" tube GL14 (1/4") 1/4"-1/6"
Condensate out connections (metric) G3/8 GL 25 (12 mm)
4)
G3/8 G1/4 GL18 (8 mm) G1/4
Condensate out connections (US) NPT 3/8" GL 25 (1/2")
4)
NPT 3/8" NPT 1/4" GL18 (8 mm) NPT 1/4"
1)
Max. cooling capacity of the cooler must be considered
2)
Models marked I have NPT threads or US tubes, respectively.
3)
Passive discharge via automatic condensate drains or traps not applicable for MTG heat exchangers. For passive discharge on
the MTS and MTV heat exchangers, use a screw connection with a clearance of at least 7 mm (see accessories).
4)
Gasket inside diameter
TC-S
Heat exchanger 2x MTG-2
3)
2x MTV-2
3)
2x MTV-2-I
2) 3)
Version / Material Glass PVDF
Flow rate v
max
1)
210 Nl/h 190 Nl/h
Inlet dew point
τ
e,max
1)
70 °C 70 °C
Gas inlet temperature ϑ
G,max
1)
140 °C 140 °C
Max. Cooling capacity Q
max
80 kJ/h 65 kJ/h
Gas pressure p
max
3 bar 2 bar
Pressure drop Δp (v=150 L/h) 19 mbar 18 mbar
Dead volume V
tot
38 ml 36 ml
Gas connections (metric) GL14 (6 mm)
4)
DN 4/6
Gas connections (US) GL14 (1/4")
4)
1/4"-1/6"
Condensate out connections (metric) GL18 (8 mm)
4)
G1/4
Condensate out connections (US) GL18 (8 mm)
4)
NPT 1/4"
1)
Max. cooling capacity of the cooler must be considered.
2)
Models marked I have NPT threads or US tubes, respectively.
3)
Passive discharge via automatic condensate drains or traps not applicable for MTG-2 heat exchangers. For passive discharge on
the MTV-2 heat exchangers, use a screw connection with a clearance of at least 7 mm (see accessories).
4)
Gasket inside diameter.
39 Bühler Technologies GmbH BE440023 ◦ 10/2018