Buhler FK308, Руководство оператора и каталог запасных частей

Страница: 12 / 24

8” & 10” Unloading Auger
9
THEORY OF OPERATION
MAINTENANCE AND STORAGE
Lubricate the universal joint about every five hours and check to see that the set screws
in the universal joint are tight.
Clean the auger thoroughly after using as dirt draws moisture and causes metal to rust.
Store in a dry place if possible.
Remove belts and store in a cool dry place if auger is to be left outdoors.
At this time check all parts for wear and order replacement parts from your nearest
dealer.
When taking the auger out of storage, check inlet and outlet ends for obstructions and
check all bolts and set screws before using the auger.
ALERT: When replacing bearings or tightening a loose bearing collar, always
tighten collar, always tighten collar in the direction of shaft rotation
using a center punch or a similar tool.
Recommended tire pressure is 32 psi.