Bühler technologies Fluidcontrol BCM-LS, Инструкция по установке и эксплуатации

Страница: 21 / 53

BCM-MS, BCM-LS
4.1.2.1 Read Commands
# Command
format Meaning Return format
1 RVal[CR] Read all measurements followed by checksum
(CRC) $ Time:x.xxx[h];T:xx.x[°C];
....;CRC:x[CR][LF]
2 RID[CR] Read identification followed by checksum (CRC) $BuehlerTechnologies;BCM-MS200
SN:xxxxx;...;CRC:x[CR][LF]
3 RCon[CR] Read configuration parameters and CAN config-
uration followed by checksum (CRC) $AO1:x;AO2:x;…;
CRC:x[CR][LF]
4 RGrad[CR] Read parameter gradients
followed by checksum (CRC) $Time:x.xxx[h]; PTG:x.xxx[1/K]; CTG:x. xxxx[pS/m/K];…;
CRC:x[CR][LF]
5 RMemO[CR] Read memory organisation, parameters and
data units are output Time [h]; T [°C]; P [-];P40 [-];PTG [1/K];C [pS/m];… [CR][LF]
6 RMemS[CR] Read number of storable datasets MemS: xxxx[CR][LF]
7 RMemU[CR] Read number of saved datasets MemU: xxxx[CR][LF]
8 RMem[CR] Read entire memory, incl. organisation, datasets
are [CR][LF] separated, press any key to interrupt Time [h]; T [°C]; P [-];P40 [-];PTG [1/K];… [CR][LF]
x.xxx;x.xxxx;x.xxxx;x.xxxx; x.xxxx;... [CR][LF]
9 RMem-n[CR] Read last n datasets in memory followed by
checksum (CRC) per dataset, semicolon separ-
ated data, datasets [CR][LF] separated, starting
with oldest dataset, press any key to interrupt $x.xxx;x.xxxx;x.xxxx;x.xxxx; x.xxxx;... ;CRC:x[CR][LF]
…
$x.xxx;x.xxxx;x.xxxx;x.xxxx; x.xxxx;... ;CRC:x[CR][LF]
10 RMem-n;i[CR] Read i datasets in memory, starting with (cur-
rent dataset)-
(n datasets) followed by checksum (CRC) per
dataset,
data semicolon separated,
datasets [CR][LF] separated, starting with the
oldest dataset, press any key to interrupt
$x.xxx;x.xxxx;x.xxxx;x.xxxx; x.xxxx;... ;CRC:x[CR][LF]
…
$x.xxx;x.xxxx;x.xxxx;x.xxxx; x.xxxx;... ;CRC:x[CR][LF]
11 RMemH-n[CR] Read datasets in memory of the last n hours fol-
lowed by checksum (CRC) per dataset,
data semicolon separated, datasets [CR][LF] sep-
arated, starting with the oldest dataset, press
any key to interrupt
$x.xxx;x.xxxx;x.xxxx;x.xxxx; x.xxxx;... ;CRC:x[CR][LF]
…
$x.xxx;x.xxxx;x.xxxx;x.xxxx; x.xxxx;... ;CRC:x[CR][LF]
12 RORef[CR] Read saved reference values RefStat (teach-in
progress: 255 not initiated, 30..1 teach-in in pro-
gress, 0 teach-in completed), RefC40, RefP40, Re-
fCTG, RefPTG $RefStat:x[-];RefC40:x[pS/m];... ;CRC:x[CR][LF]
13 RLim[CR] Read set limits for alarms and calculate Aging-
Progress value and RUL Defaults:
LimitP40%: 5.0 %
LimitC40%: 400 %
MaxT: 80 °C
MaxTMean: 50 °C
RULh: 0h (not set)
RULfB: 0 (not set)
LMax: 90 %
1
LMin: 20 %
1
$LimitP40%:x.x[%]; LimitC40%:x[%]; MaxT:x[°C];
MaxTMean:x.x[°C];... ;CRC:x[CR][LF]
Tab. 13: Serial communication - read commands
1
only for level sensors
19 Bühler Technologies GmbH BE150104 ◦ 03/2021