Bug-O Systems AVC-2060, Инструкция и каталог запасных частей

Страница: 5 / 26

5
INTRODUCTION
The AVC-2060 is an Plasma Height Control (PHC) for the Pendulum Weaver (WPD-2100) that controls
the tip to work distance and maintains a constant voltage, which provides a more uniform result.
Available in three models, by voltage. Plasma Height Control senses the actual voltage, compares
this value to the set point, and raises or lowers the torch accordingly. It features motion based on the
plasma source “ok to move” signal and automatically shuts off when voltage drops too low (generally
below 36 volts).
The AVC-2060 Plasma Height Control is available as original equipment or as a retrofit unit designed
to provide automated height control on the BUG-O Modular Drive Systems (MDS) with a Pendulum
Weaver (WPD-2100). Height Slide Assembly (CAS-1500) replaces the welding clamp originally
supplied on the Pendulum Weaver.
SPECIFICATIONS
Net Weight:
14.5 lbs (6.6 kg)
Travel:
13" (330 mm)
Carrying Capacity:
10 lbs (4.5 kg)
Operating Range: 36 to 300 Volts
Minimum Recommended Standoff:
1/8" (3.2 mm)
ITEMS SUPPLIED
AVC-2060
Plasma Height Control for
WPD-1200 Linear Weaver i
ncludes:
CAS-1500-18 Height Slide Assembly
CAS-1558 Pendulum Weaver Adaptor for CAS-1500-18
AVC-1550-PL-
??
Hall Effect Current Sensor Assembly
AVC-2051-10 MDS AHC 10' (3.0 m) Remote Control
AVC-2055 MDS AHC Control Box
“ ??
” is the volt sensor option:
ID
for use with I
nternal D
ivider
RV
for use with
R
aw
V
oltage of blowback start type sources
PS
for installation inside the
P
ower
S
ource for HF or capacitive discharge type sources
Sensitivity
Difference between DC cutting voltage and set point (ΔV)
ΔV > 32 32 > ΔV > 15 15 > ΔV > 3 3 > ΔV > 0.4 0.4 > ΔV
Nominal
Maximum
Slide Speed
24 in/min
(609 mm/min)
24 in/min
(609 mm/min)
1.55 in/min
per volt
(39.3 mm/min
per volt)
0.46 in/min
per volt
(11.8 mm/min
per volt)
slide may
not move
Nominal Time
to Reach 90%
Speed
0.2 seconds 0.2 - 2 seconds
2 seconds 2 seconds
slide may
not move