Buffalo TeraStation 6000 Series, Руководство пользователя

Страница: 94 / 226

Folder Type Full backup
Overwrite
(incremental) Overwrite
(differential) Management
backup Snapshot
backup
iSCSI backup
USB drive
connected
to this
TeraStation
*2, 5
Yes Yes Yes Yes
*4
No No
Shared folder
on another
Buffalo NAS
device
*2, 5, 6
Yes Yes Yes No Yes Yes
*7
Shared folder
on rsync-
compatible
device
Yes Yes Yes
No No No
*1 You can select up to the second level of folders. However, if the folder name of second level folders contains
symbols, that folder may not appear as the backup source.
*2 The folder should select the “Backup” checkbox for “LAN Protocol Support” on the shared folder settings.
*3 This includes both shared folders and iSCSI file I/O volumes.
*4 The compatible file systems are ext3, XFS, Btrfs, and NTFS.
*5 If the “Inherit subfolders’ access restrictions” option is selected when creating a backup job, use Btrfs, XFS, or ext3
file systems.
*6 If the “Inherit subfolders’ access restrictions” option is selected when creating a backup job, the device should be
the Buffalo NAS device whose subfolders’ access restrictions is available.
*7 The folders should be created on a Btrfs-formatted area.
Preparing a Backup Destination
First, configure a shared folder on a Buffalo NAS device or connected USB device as a backup destination. The
following procedure explains using another shared folder on a TeraStation as a backup destination. The procedure
may vary depending on which Buffalo NAS device is selected as a destination.
Note: If you want to set this TeraStation as the backup destination for an rsync-compatible device, refer to the “If
Backing Up from rsync-Compatible Devices to the TeraStation” section instead of following the procedure below.
1
From Settings, click File Sharing .
2
Click the settings icon ( ) to the right of “Folder Setup”.
3
Choose the folder to set as a backup destination.
93
Chapter 5 Backup