21
Using the Function Button
Initialization
- You can easily
bring your LinkStation Quad
back to factory settings with the
following steps.
1. Hold down the power button for
8 seconds. The LinkStation will
shut down after about 30 seconds.
2. While holding down the
function button, press the power
button. The LinkStation will
power on and the function LED
will begin to flash blue.
3. While the function LED is still
flashing, hold the function button
down for six seconds.
Dismount
- Before disconnecting USB devices from the LinkStation Quad, they should be
dismounted. Hold the function button down until the function LED glows blue, and then turns
off. It’s now safe to unplug your USB devices.
Note: Unplugging USB devices without dismounting them first may corrupt your data!
Function Button
Power Switch
Power LED
Function LED
