English - 20
HOW TO OPERATE MEMORY COOKING
After having finished memory programming, just press the
NUMBER
pad of the memory
number you want to select. The oven will automatically start heating according to the pre-
programmed cooking time and power level.
1.
Make sure the oven is plugged into a properly earthed
electrical outlet and “ON” appears in the display window.
2.
Open the door.
The oven lamp will be turned on.
3.
Put the food into a suitable container, place it in the centre
of the oven and then close the door securely.
Result :
The oven lamp will go off.
4.
Press
NUMBER
pad.
Result :
The selected memory program automatically
starts heating. But,
NUMBER
pad 1, 2, 3
operate after 2 seconds.
HOW TO OPERATE DOUBLE QUANTITY PAD
1.
Press the
Double Quantity
pad.
2.
Press the desired memory
NUMBER
pad.
Result :
Cooking time which was multiplied by the preset
factor appears in the display and cooking starts
with time digits counting down.
You don’t need to press
START
button to start heating.
DOUBLE QUANTITY PAD PROGRAMMING
1.
Hold down
CANCEL
pad and then press the
DOUBLE
QUANTITY
pad. Hold together for 2 seconds.
2.
Select desired program code by using
NUMBER
pads.
3.
Press
NUMBER
pads to set the magnification factor within
the range from 1.00 to 9.99.
4.
Press the
START
button.
Default factor is 1.65 preset from the manufacturer for increasing the cooking time.
Make sure that you set a correct factor between 1.00 and 9.99 for each memory
code number.
Press pad to exit the programming mode.
Though you can successfully set a double quantity factor whose setting might result
in excess of the maximum time allowed for each power level, the oven does not
operate exceeding the maximum time.
GK640, GK641_XEU_DE68-04279A-01_EN.indd 20
2014-08-07 �� 2:22:42
