UK
Fitting the Element and Control box to the Fryer body.
Position the Element/Control Box into the body of the fryer, locating it into the hole (A) at the side
of the main body, using the pin (B) on the side of the Control Box. Rotate the control unit and put
spring pin(C) into the hole(D) of the main body, You can hold the position if the appliance is not to
use. Continue to push spring pin and rotate the control box, Before the element is lowered into its
operating position in the pan. Then the spring pin will be put into the hole(E) of the main body, At
the mean time safety switch(F) is going to work.
The fryer can now be filled with the appropriate cooking oil.
Connect the Fryer to the correct power supply and it is ready to operate.
A
B
C
D
E
F
