Buffalo CD474, Инструкция по эксплуатации

Страница: 4 / 32

UK
Trouble Shooting
If your BUFFALO product develops a fault, please check the following table before making a call to your
BUFFALO agent.
Fault Probable Cause Action Required
The product is not working The product is not switched on Check the unit is plugged in correctly and
switched on
Plug and lead are damaged Call your BUFFALO agent or qualified
electrical technician
Fuse in the plug has blown Replace the plug fuse
Power supply problem Check power supply
Internal wiring fault Call your BUFFALO agent or qualified
electrical technician
Product does reach set temperature Faulty thermostat Call your BUFFALO agent or qualified
electrical technician
Faulty element Call your BUFFALO agent or qualified
electrical technician
The light only comes on when the power is
going to the element so the product can be
hot when this light goes out. Bulb has failed Call your BUFFALO agent or qualified
electrical technician
Power indicator light comes on but product
does not heat up Faulty element Call your BUFFALO agent or qualified
electrical technician
Faulty thermostat Call your BUFFALO agent or qualified
electrical technician
Thermostat set incorrectly Check thermostat setting
Product slow to heat up Cooking surface not cleaned Clean cooking surface as instructions
Faulty element Call your BUFFALO agent or qualified
electrical technician
Technical Specifications
Code Voltage
Power
Watts
Current
Plate Type Dimensions
Weight Kgs
Top Bottom h x w x d (mm)
CD474 230V 50Hz 1500W 6.5A Rib Rib 210 x 290 x 320 14.5kgs
DM902 230V 50Hz 2900W 12.6A Rib Rib 210 x 540 x 320 27kgs
DM903 230V 50Hz 2200W 9.5A Rib Rib
210 x 380 x 320
19kgs
GJ454 230V 50Hz 1500W 6.5A Flat Flat 210 x 290 x 320 16kgs
GJ455 230V 50Hz 2200W 9.5A
Flat Flat
210 x 380 x 320 21kgs
GJ456 230V 50Hz 2900W 12.6A
Flat Flat
210 x 540 x 320 29kgs
Electrical Wiring
This appliance is supplied with a 3 pin, moulded, BS1363 plug and lead, with a 13 amp fuse as standard
The plug is to be connected to a suitable mains socket
The appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed, using a dedicated earthing circuit
If in doubt, consult a qualified electrician
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency disconnection being required
they must be readily accessible