Buffalo Benelli Classica Series, Инструкция по эксплуатации

Страница: 23 / 49

23
SWITCHING FRONT HEADLIGHT ON/OFF
To turn on front headlight twist power shifting handle forward for about 2 seconds and return
to original position. Front headlight should now be turned on. When ready to turn headlight off,
twist power shifting handle forward again for 2 seconds and return to original position.
Speedometer
After the power on, the battery power display window will show the
③
Speedometer
automatically. When the bike is not moving it will display zero. The speedometer always
displays the current speed of the eBike.
Odometer
Once the power is on, the mileage the eBike has traveled will display on the
④
odometer. The
mileage is tracked no matter if the rider is using the pedal assist motor or riding normally.
*Attention: The range of the mileage display is 999 miles. Once maximum mileage has been
achieved, the display will reset to zero.
Automatic Switch-Off
If you stop and do not move your Benelli by Buffalo Corp eBike for 5 minutes, the system
switches off automatically. If you subsequently want to ride using the assistance, you will need
to use your key and turn on the LCD display as mentioned above.
BRAKING SYSTEM
Brake lever
The bike is equipped as standard with a suitable brake lever. Check regularly that when you
operate the brake lever it does not reach the handlebar and make contact with it. With the
brake lever pulled, push the bike forward and check whether the braking performance is
sufficient. If the bike rolls slightly forwards, you will need to have the brake cable readjusted or
the brake pads replaced.