10
8.4 Management
Management Settings includes the following
parameters:
Password
Setting Interface
Logging Settings
SNMP Agent Settings
8.4.1 Password
The user ID is "root". The default password is
blank -- no password.
To input a new password:
• Enter the password in the "New Password"
field
• Re-enter the password in the "Confirm
Password" field
If you are changing an old password, you must
enter the old password in the "Current
Password" field also.
8.4.2 Setting Interface
Configuration of the WLM-L11G via a web
browser (including Client Manager) or a
Telnet session may be enabled or disabled
here. A wired session via the serial port and
terminal software may be used to configure
the WLM-L11G if WEB and Telnet are
disabled.
8.4.3 Logging Settings
This enables reporting to the syslog server.
Check the "use" box if you want the system
logs to be sent to the log server. The setup
for the log server should be found in the
syslog’s manual. The following parameters can
be configured: Log type, Log level, Notice,
Information content, Setup record (AirStation
setup record), Login recognition (includes
Radius) and System.
8.4.4 SNMP Agent Settings
Enabling the SNMP agent function allows the
following:
Access from the SNMP manager. Access the
WLM-L11G local MIB information (through a
web browser) such as the WLM-L11G’s
location, the WLM-L11G’s administrator, and
the SNMP community where the WLM-L11G
belongs.
When MIB file is accessed, the following
object ID (the ID which indicates information
to be included in general network devices) or
the number will be used.
Figure 8.41
Passwords
Figure 8.4.3
Logging
Settings
