Buffalo AirStation WLAR-L11-L, Справочное руководство

Страница: 36 / 57

WLAR-L11-L Reference Manual 34
Windows 2000
If the TCP/IP Protocol is installed, you can check the IP address using the following procedure.
1.Click the Start button, select Programs , Accessories and Command Prompt.
2.C:\> will be displayed on screen. Enter
IPCONFIG /ALL
and press the
Enter
key.
3.The IP address and sub-network be will be displayed in the IP Address/Subnet Mask field
.
If the IP address displayed is incorrect, refer to the TCP/IP Protocol Setting section in Chapter
6, "Preparing AirStation Setting" in the separate Internet Connection Manual.
Windows NT 4.0
1.Click the
Start
button, select
Programs
and
Command Prompt
.
2.Enter
IPCONFIG
and press the
Enter
key. Check the IP address value
.
If the IP address displayed is incorrect, refer to the TCP/IP Protocol Settings section in Chapter
6, "Preparing AirStation Setting" in the separate Internet Connection Manual.
Cause (5)
You did not enter your password when starting Windows 98/95. (On the Network Password
screen, you clicked the
Cancel
button, or pressed the
ESC
key without entering your pass-
word.)
Solution (5)
When you start Windows 98/95, be sure to enter your password in the Network Password
screen and click the
OK
button. If you have forgotten your password, enter another user name.
The new user name and password will be registered in the computer.
Cause (6)
The Ethernet LAN PC setting and the wireless LAN PC setting are incorrect.
Solution (6)
Check the TCP/IP protocol validity for the Ethernet LAN PC and the wireless LAN PC.
Cause (7)
The TCP/IP protocol is installed, but the IP address setting is incorrect.
Solution (7)
Check if the IP address setting is correct.
Refer to the "Allocating IP Addresses" section (page 36) in Chapter 2, Troubleshooting.
Ethernet adapter Local Area Connection
IP address..................................... :192.168.100.2
Subnet Mask................................. :255.255.255.0
Connection-specific DNS Suffix :
Description................................... :MELCO WLI-PCM-L11 Wireless LAN Adapter
Physical Address......................... :00-60-1D-1F-36-23
DHCP Enabled............................ :No
Default Gateway.......................... :
DNS Servers................................ :
Ethernet adapter wlipcm1
IP address :192.168.100.188
Subnet Mask :255.255.255.0
Default Gateway :192.168.100.1