CGGUN20 Cordless Grease Gun Assembly & Operating Instructions
4
Keep children, and other distractions at a distance while operating power tools.
Use common sense while operating this power tool.
Do not use this tool if you are:
•
Feeling tired or are under the influence of alcohol or drugs.
•
Wearing loose clothing or jewelry. Keep long hair pulled back and away from moving parts.
•
Overreaching or have improper footing. Handling the tool in this way could cause serious injury.
When using this power tool always:
•
Wear the proper safety equipment, such as safety goggles, dust masks, non-skid shoes, etc.
Follow these steps to maintain safe working conditions and good working condition of power tools.
Improper care can result in
electric shock or serious injury.
•
Secure and support the work piece using clamps.
Do not use your hands to hold the piece in place.
•
Use the correct tool for the job.
Using the correct tool is safer and faster.
•
Make sure the power switch is in good working order.
If the power switch no longer turns the tool “ON” or “OFF”,
discontinue use, and have the tool replaced or repaired.
•
Keep out of reach of children
, or any untrained person. Store tools in a safe and dry place.
•
Keep tools clean, and cutting tools sharp.
Maintaining tools with proper care will increase the life of the power tool, and
reduce the risk of injury.
•
Check to be sure all moving parts are free from binding and are properly aligned.
•
Use only accessories that are recommended by the manufacturer for your tool model.
Only qualified repair personnel must perform tool service.
Service or maintenance performed by unqualified personnel could result in
a risk of injury.
Safety glasses and ear protection must be worn during operation.
SERVICE
Tool service must be performed only by qualified repair personnel.
Service or maintenance by unqualified personnel could result in a
risk of injury.
When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual.
Use
of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury.
