background image

Page 2

Symbol Definitions

Symbol

Property or statement

PSI

Pounds per square inch of pressure

NPT

National pipe thread, tapered

NPS

National pipe thread, straight

WARNING marking 

concerning Risk of Eye Injury.  

Wear ANSI-approved eye protection.
WARNING marking concerning 

Risk of Hearing Loss.  

Wear hearing protection.
WARNING marking concerning 

Risk of Respiratory Injury.  Wear 

NIOSH-approved respirator.

WARNING marking concerning 

Risk of Explosion.
WARNING marking concerning 

Risk of Injection Injury. 

Do not direct spray at hands or body.  

Have injection injury treated immediately.
WARNING marking concerning Risk of Fire.  

Ground any metal bucket used with sprayer.

WARNING! Read all instructions.

 

Failure to follow all instructions listed below 

may result in fire, serious injury and/or DEATH.

The warnings and precautions discussed in this 

manual cannot cover all possible conditions and 

situations that may occur.  It must be understood 

by the operator that common sense and caution 

are factors which cannot be built into this 

product, but must be supplied by the operator.

ITEM # APS517  Airless Paint Sprayer Operating Instructions

Save This Manual

Important Safety Information

In this manual, on the labeling, and all other 

information provided with this product:

  This is the safety alert symbol.  It is used to 

alert you to potential personal injury hazards.  

Obey all safety messages that follow this 

symbol to avoid possible injury or death.

DANGER indicates a hazardous situation which, 

if not avoided, will result in death or serious injury.

WARNING indicates a hazardous situation which, 

if not avoided, could result in death or serious injury.

CAUTION, used with the safety alert symbol, 

indicates a hazardous situation which, if not avoided, 

could result in minor or moderate injury.

NOTICE is used to address practices 

not related to personal injury.

CAUTION, without the safety alert symbol, is used to 

address practices not related to personal injury.

  .

t

n

e

m

p

i

u

q

e

 

e

h

t

 

g

n

it

a

r

e

p

o

 

e

r

o

f

e

b

 

n

o

it

a

m

r

o

f

n

i

 

y

t

e

f

a

s

 l

l

a

 

d

a

e

R

Save these instructions.

injury to persons, read and understand all instructions included 

in this manual. Be familiar with the controls and proper usage 

of the equipment.

• 120 Volts AC

• 650 Watts 

• 25 ft. Hose

• Max (Fluid) delivery: 0.3 Gallons /min

• Power cord (ft.): 6.5 ft

• Working pressure: 2200-3000 PSI

• Amperage (amps): 4.0-7.5A

• Horsepower (hp): 7/8 HP

• Tip Size: 517

SPECIFICATIONS:

Содержание APS517





















Отзывы: