all objects with read-only permissions using this community
string.
Write/Read
Community
Specifies the community string to authenticate the SNMP
agent for read/write access. The SNMP server will access
all objects with read/write permissions using this
community string.
SNMP V3 Setting is shown in the following table:
Setting
Description
User Name
User Name.
Write/Read Type
The write/read type selection.
User Auth. Type
Provides authentication based on HMAC-MD5, or HMAC-SHA
algorithms. 8-character passwords are the minimum requirement
for authentication.
Auth. Key
The Encryption key.
Encryption Protocol
The encryption protocol could be DES, AES or 3DES.
Encryption Key
Encryption Key.
7.3 Port Mirror
The Mirror Port function can be used to monitor data being transmitted
through a specific port. This is done by setting up another port (the mirror port)
to receive the same data being transmitted from, or both to and from, the port
under observation. Using a mirror port allows the network administrator to sniff
the observed port to keep tabs on network activity.
Setting
Description
