Buell 2005 P3, Руководство по обслуживанию, Страница: 312 / 426

6-2 2005 Buell P3: Drive/Transmission
HOME
TORQUE VALUES
Table 6-4. Clutch Specifications
WET CLUTCH/MULTIPLE DISC
CLUTCH PLATE THICKNESS NEW COMPONENTS SERVICE WEAR LIMITS
ITEM
Friction plate (fiber) (in.) 0.0866 + 0.0031 N/A
Friction plate (fiber) (mm) 2.200 + 0.079 N/A
Steel plate (in.) 0.0629 + 0.0020 N/A
Steel plate (mm) 1.598 + 0.051 N/A
Clutch pack (in.) N/A 0.413 in. (minimum)
Clutch pack (mm) N/A (16.787)
MAXIMUM ALLOWABLE WARPAGE
Friction plate (fiber) (in.) N/A 0.0059
Friction plate (fiber) (mm) N/A 0.150
Steel plate (in.) N/A 0.0059
Steel plate (mm) N/A 0.150
ITEEM TORQUE NOTES
Battery terminal bolts 60-96 in-lbs 7-11 Nm Page 6-6
Clutch mainshaft nut 70-80 ft-lbs 95-109 Nm LOCTITE 262 (red), left hand threads, Page 6-15
Crankcase 1/4 in. screws 180-100 in-lbs 9.0-12.4 Nm LOCTITE 262 (red), Page 6-35
Crankcase 5/16 in. screws 15-19 ft-lbs 20-25 Nm LOCTITE 262 (red), Page 6-35
Engine sprocket nut 190-210 ft-lbs 258-285 Nm LOCTITE 262 (red), Page 6-15
Magnetic drain plug 11-15 ft-lbs 14.9-20.3 Nm metric, page 6-6
Primary cover bolts 100-120 in-lbs 11-14 Nm Follow torque sequence, Page 6-6
Retention collar screw 13-17 ft-lbs 18-23 Nm LOCTITE 243 (blue), Page 6-38
Shift lever pinch fastener 12-14 ft-lbs 16-19 Nm Page 6-6
Shifter shaft assembly locknuts 90-110 in-lbs 10-12 Nm Bottom nut first, same torque for top, Page 6-37
Transmission sprocket nut
See NOTES See NOTES
LOCTITE 262 (red), left hand threads, special torque
turn method, Page 6-40
Transmission sprocket screws 90-110 in-lbs 10-12 Nm Replace after 3 removals, Page 6-40